CrystalDiskInfo Reviews

CMark Reviews

CrystalDiskInfo mentions (418)

• Everything I Know About SSDs (2019)

  >if you get the SMART data with smartmontools/smartctl, you can inspect Percentage Used. CrystalDiskInfo[1] can be used for this purpose over on Windows. Some vendor-provided utilities like Samsung Magician will also provide this data with appropriate drives. [1]: https://crystalmark.info/en/software/crystaldiskinfo/. - Source: Hacker News / over 1 year ago

• A3Launcher has broken my steam, more info below. Anyone know how to fix this chicanery?

  Verify that CrystalDiskInfo shows "Health: Good" for drive D. Source: almost 2 years ago

• Failed Hard Drive From Windows System

  Plug it directly into sata and see if it's shown in disk manager with the correct capacity. If it is post a screenshot of the smart data from https://crystalmark.info/en/software/crystaldiskinfo/ and we can see what the best way to proceed would be . Source: almost 2 years ago

• Can’t access old HDD

  The disk is likely failing. DO NOT attempt any write operations like assigning a letter or changing file ownership. What you're saying suggests that the filesystem is corrupted, it's just unclear to what extent. It would be helpful if you provided a screenshot from CrystalDiskInfo. Most likely the best course of action is to boot https://www.hddsuperclone.com/hddlivecd and image the drive to a file on a different,... Source: almost 2 years ago

• My SSD suddenly died. I only lost 10 minutes of data, thanks to ZFS

  Minimum write size of a modern Flash chip can be ~100MB(!) according to a comment found in a random orange website[1]. So 5MB write every 10 minutes can be 600MB/hr, which is 4.8TB/8-hr-day, which is 24TB/40-hour-week, which is 3.43 DWPD real time for a 1TB drive, and 2500 TBW in 2 years real time[2]. Official quoted specification for SN850 is 600 TBW of write endurance, likely after derating for obvious warranty... - Source: Hacker News / about 2 years ago

CMark mentions (6)

• Why Is This Site Built with C

  Using a portable minimal markdown dependency (such as cmark [1]) I think markdown can be quite a low barrier here. I personally do similar to what you have described on my blog, with an additional cmark conversion and find it quite simple [2]. [1] https://github.com/commonmark/cmark. - Source: Hacker News / 6 months ago

• Ask HN: What's the simplest static website generator?

  I use GNU make. Write content in markdown, feed it to https://github.com/commonmark/cmark to create html. I intended to splice files together using xslt but echo and cat written in the makefile sufficed. I'm not totally sure I'd recommend that but I do like the markdown => html flow. - Source: Hacker News / over 1 year ago

• Building a Personal Internet from Markdown Files

  I seem to be in the middle of trying to build something similar to this. I want it to run on an android phone but otherwise the same sort of idea, offline-first information I want access to. There's some weirdness around android browsers refusing to load html from the phone itself on security grounds. The OP uses a "progressive web app" which seems to be the proper way to do this at some point in the past, but... - Source: Hacker News / over 1 year ago

• Using Rust with Elixir for code reuse and performance

  Yeah no doubt it, although in this case the C implementation has been a long running project that's under the official commonmark GitHub repo at https://github.com/commonmark/cmark. But I think the most important thing here is an Elixir NIF already exists to use it. The blog post as is leaves readers having to implement ~100 lines of Elixir code to use the Rust version because the authors of blog post didn't... - Source: Hacker News / about 4 years ago

• How do I link and use a c library?

  I'm confused about how to use a c library (specifically, cmark) from zig. Source: about 4 years ago