IPv6 test VS ifconfig.co

You can see both addresses here. https://ipv6-test.com/ Likely your ISP has IPv6 and your old router wasn't capable or setup for it. The new one has it enabled by default, and web browsers prefer it over 4, so basic IP address pages show it first. Source: 5 months ago

IPv6 works perfectly well on the router, and my LAN devices can ping each other via their prefix-delegated addresses, but I can't reach the www via IPv6 (according to ipv6-test.com and ping6). Source: 9 months ago

For other sites, Edge is clearly using my IPv6 client address. https://ipv6-test.com and https://ipv6.google.com work fine, for example. And I can confirm in logs on my external site that I'm hitting my site with the client's temp IPv6 address. Source: 10 months ago

Since updating to 23.1 after my firewall does it's weekly reboot, I need to disable any one of my internal vlan interfaces on opnsense and re-enable to make IPv6 work. My WAN always gets it's ipv6 ip but something about the routing to the internal interfaces doesn't work. IPv6 works from the firewall to external works but my desktop and servers can't send/receive any ipv6 traffic. I've tried stopping/starting... Source: 12 months ago

I ran a test on https://ipv6-test.com that showed both IPv4 and IPv6 were not supported initially. After I connected my android tablet to my hotspot to test it as well it showed IPv4 was not supported, but IPv6 was. Then I ran the test again on my computer and it showed the same results of IPv4 not working, but IPv6 is, instead of both not working initially. Source: 12 months ago

If you want to try this from WiFi without plugging into LAN 1, go to a site like https://ifconfig.co/ to find your Public IP address and then take that and either add or subtract 1 from the last number to get the Public IP address of the Verizon gateway and login using either http:// or https:// (depends on firmware version). Source: 11 months ago

I use Private Internet Access and they provide the necessary .ovpn file to insert into the container. That goes somewhere in the /config folder I believe, it's in the docs. Then I added auth-user-pass "filename" (I used credentials.conf) into the .ovpn so it can log itself in and get the VPN up. I went into docker exec -it qbittorrent /bin/bash and confirmed I was on the VPN connection and not my WAN using curl... Source: about 1 year ago

If [[ "$DO_IPV6" -ne 0 ]]; then # Get the current external IPv6 address IPV6=$(curl -fsS -X GET -6 https://ifconfig.co). Source: about 1 year ago

If the rule is disabled, the pfsense machine checks updates and packages just fine and the sites all load. Running curl -4 ifconfig.co shows the pfsense VM is not going through the vpn tunnel as it is showing the non-vpn ip. Source: over 1 year ago

Related: here is my collection of links/domains which are useful, but difficult to search for on Google. DNS / Networking: - http://neverssl.com/ - manually trigger a paywall / login screen on public wifi networks - https://ifconfig.co - Simplest way to get own IP address, especially from scripts. Web development: - http://vcap.me, http://lvh.me - Main domain and all subdomains resolve to localhost. -... - Source: Hacker News / over 1 year ago