LinuxCNC (the Enhanced Machine Control) VS Open Camera

For a hobby machine, DIY might be the way to go. I did my sharp knee mill over several years. Ball screws from Rockford ball screws, were not cheap, but work well. Servo motors and gecko motor controllers from automationtechnologiesinc.com. Scales for feed back from dropros. Controller card from mesanet.com. All controlled with linuxcnc.org and a usb controller from vistacnc.com. Milled motor mounts for the... Source: over 1 year ago

I'm building a DIY-ish 3d printer, I know the Duet 3D boards can run spindles. https://www.machsupport.com/software/mach3/ Or Http://linuxcnc.org/ can run stepper driver boards with a spare desktop. Source: over 1 year ago

Good questions, I may be able to help with some of them but I know there are plenty of more experienced mill owners: 1. This is usually done manually or with indexing pins. If you look at the nomad flip jig you can see some techniques for physically re-aligning the part. Since you have skills in that area, a software solution could help, but I’m not aware of anything off the shelf in the hobby space. It could be... Source: almost 2 years ago

This system is so old, I would recommend looking into converting to LinuxCNC https://linuxcnc.org/. Source: about 2 years ago

If you are basically just a CNC operator they will take about the same amount of time to learn how to run them. LinuxCNC however may take a little more time configuring the system depending on features. You will definitely learn a bit more about how your machine operates configuring LinuxCNC since you have to compute a few settings based on your screw pitches and latency jitter of your PC. The calculators and... Source: over 2 years ago

Open Camera is one of my favorite. You can download it from the Fdroid app store (or from Google Play store). Source: about 1 year ago

I use https://opencamera.org.uk/ on my 5T running Lineage. Its photos are identical to the stock camera running on the official OS. Source: about 1 year ago

You can go around some of the extra processing by using other camera apps, for example "Open Camera". It can even shoot RAW photos, so that the least amount of processing is applied to the image. Unfortunately, you can't disable all of the processing, because some of it happen on the hardware, or in the camera's kernel module. https://opencamera.org.uk/. - Source: Hacker News / over 1 year ago

If you want to see what the biggest image available is, I suggest using this camera app https://opencamera.org.uk/. Source: over 1 year ago

Shout out to Open Camera though. It has so many features I would have never even thought of. Source: over 1 year ago