Use https://sourceforge.net/projects/grub2win/ to manage dual (multiboot) from Windows , makes yput life easyer. If you have more than one disk instal Linux on a separate one if not you need to create a separate partition. When you install Linux if you have 2 drives make sure that Linux grub (bootloader) is installed on the drive wher Linux resides, not on the one where Windows and it's bootloader is, in case you... Source: about 1 year ago

Otherwise, what you'll have to do is image a USB drive with a partition management software or distro (e.g. GParted Live), boot from it, and then resize your partition from there. This does carry more risk of data loss than the dual SSD method, but it's more universal (you haven't mentioned if this is a laptop with more than one removable storage option or not, for instance), and it's unlikely to cause any harm.... Source: over 1 year ago

I have a suggestion, follow the previously advised installation process to install CrOS Flex on a separate drive, then reconnect and enable the Windows disk through the boot menu, once back there you can install a GRUB manager under Windows, like Grun2Win, it's easy to install and set up, once you are all done, the final result will be easier to switch from one OS to the next, instead of every time going through... Source: almost 2 years ago

When using Opencore for booting Windows 10, causes many issues. Even it causes issues when you boot MacOS after restarting from Windows 10. So Fix is Simple Use Grub2win as main bootloader and boot Windows or Opencore ( Chainload opencore efi file) from there. I am available for your queries and help. Source: almost 3 years ago

However, I have used this https://sourceforge.net/projects/grub2win/ I install it on the windows side and configure it. It will enable me to choose ubuntu> Ater booting in Ubuntu, I do grub install. If that's too complicated to install grub repair when you boot into Ubuntu and run it. Source: almost 3 years ago

It is not clear what you are trying to do, but RAM for a 2011 will be dirt cheap and easy to install, you can max is out very affordably. You may have 2 slots or 4 slots, 8 GB in each will be real nice if supported. (check everymac.com). Source: 10 months ago

I use the everymac.com website to compare the relative computing power of Macs. The Geekbench 5 section tells you the multicore scores to show you how much work they can do. The M1 mini is comparable to the 2020 iMac 27 with the i7-10700k CPU. Source: 12 months ago

Everymac.com is a far better resource for figuring out classic Apple product lines than Wikipedia. Source: 12 months ago

The CPU's are held on by thermal paste, just carefully twist and seperate them. Clean themup both sides with de-natured alchohol, I use Methalated spirits, and wipe of the residue. They should just slot into place. Place the heat sinks over, locating diagonal corners, and tighten lightly using diagonal screws. There used to be two types of processor about, with and without lid. A lot od older threads show the lids... Source: 12 months ago

EveryMac is the place to find out what specs your apple has and what it is worth. Source: about 1 year ago