Following fingerprint at https://nmap.org/cgi-bin/submit.cgi?new-service :. - Source: Hacker News / 26 days ago
A network scanner is a software tool that scans the network for connected devices. It is also used for diagnostic and investigative purposes to find and categorize what devices are running on a network. This tool takes an IP address or a range of IP addresses as input and then scans each IP Addresses sequentially and determines whether a device is present on that particular IP address or not. It scans the network... - Source: dev.to / 2 months ago
➜ ~ nmap 192.168.1.201 Starting Nmap 7.94 ( https://nmap.org ) at 2023-12-07 22:02 CET Nmap scan report for 192.168.1.201 Host is up (0.0061s latency). Not shown: 994 closed tcp ports (conn-refused) PORT STATE SERVICE 7000/tcp open afs3-fileserver 8008/tcp open http 8009/tcp open ajp13 8443/tcp open https-alt 9000/tcp open cslistener 9080/tcp open glrpc Nmap done: 1 IP address (1 host up) scanned in... Source: 5 months ago
┌──(figaro㉿kali)-[~/Desktop] └─$ sudo nmap -O 142.250.203.131 1 ⨯ Starting Nmap 7.91 ( https://nmap.org ) at 2021-11-10 12:36 EST Nmap scan report for waw07s06-in-f3.1e100.net (142.250.203.131) Host is up (0.0034s latency). Not shown: 998 filtered ports PORT STATE SERVICE 80/tcp open http 443/tcp open https Warning: OSScan results may be... - Source: dev.to / 5 months ago
Now let’s go to the "Project Page" for the developers http://nmap.org/ and grab the very latest cutting-edge version. Look for the download page, then the section “Source Code Distribution” and the link for the "Latest development nmap release tarball" and note the URL for it - something like:. Source: 7 months ago
Starting Nmap 7.70 ( https://nmap.org ) at 2023-09-19 20:16 CEST Nmap scan report for Host is up. All 1000 scanned ports on are filtered. Source: 7 months ago
A third way to test our SSL/TLS pinning is using network scanning tools such as Nmap to perform an SSL port scan. Nmap provides the ssl-enum-chipers command to scan an SSL port on a specified target. - Source: dev.to / 8 months ago
Ke netshoot -- bashbash-5.0# nslookup kubernetes.defaultServer: 10.96.0.10Address: 10.96.0.10#53Name: kubernetes.default.svc.cluster.localAddress: 10.96.0.1 nmap -p 53 10.96.0.10Starting Nmap 7.80 ( https://nmap.org ) at 2021-01-15 22:46 UTCNmap scan report for kube-dns.kube-system.svc.cluster.local (10.96.0.10)Host is up (0.000098s latency).PORT STATE SERVICE53/tcp open domainNmap done: 1 IP... Source: 10 months ago
$ nmap 192.168.100.1 Starting Nmap 7.80 ( https://nmap.org ) at 2023-07-13 13:04 EDT Nmap scan report for 192.168.100.1 Host is up (0.010s latency). Not shown: 999 closed ports PORT STATE SERVICE 80/tcp open http Nmap done: 1 IP address (1 host up) scanned in 0.22 seconds $ wget http://192.168.100.1 --2023-07-13 13:07:00-- http://192.168.100.1/ Connecting to 192.168.100.1:80...... Source: 10 months ago
$ nmap localhost Starting Nmap 5.21 ( http://nmap.org ) at 2013-03-17 02:18 UTC Nmap scan report for localhost (127.0.0.1) Host is up (0.00042s latency). Not shown: 998 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds. Source: 10 months ago
Nmap to an IP Starting Nmap 7.60 ( https://nmap.org ) at 2023-07-06 15:26 Pacific Daylight Time. Source: 10 months ago
The whole point of using an online port scanner instead of leveraging native Powershell cmdlets like test-netconnection or test-connection), or simply using Nmap is that you don't need to ssh to an external server in order to perform the scan. Source: 10 months ago
Now let’s go to the "Project Page" for the developers http://nmap.org/ and grab the very latest cutting-edge version. Look for the download page, then the section “Source Code Distribution” and the link for the "Latest development nmap release tarball" and note the URL for it - something like:. Source: 10 months ago
$ minikube service kafka-service --urlhttp://192.168.99.100:30123$ nmap 192.168.99.100 -p 30123Starting Nmap 7.40 ( https://nmap.org ) at 2017-08-17 20:43 PDTNmap scan report for 192.168.99.100Host is up (0.00036s latency).PORT STATE SERVICE30123/tcp open unknownNmap done: 1 IP address (1 host up) scanned in 13.06 seconds In the end, it looks like 192.168.99.100:30123 should be the way to access Kafka from... Source: 10 months ago
You can browsed the docs and reference guide on the nmap site: https://nmap.org/. Source: 10 months ago
─$ sudo nmap -sV -sC -oA nmap.scan 10.10.10.198 [sudo] password for kali: Starting Nmap 7.93 ( https://nmap.org ) at 2023-06-17 05:31 EDT Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 3.71 seconds. Source: 11 months ago
$ nmap localhost Starting Nmap 5.21 ( http://nmap.org ) at 2013-03-17 02:18 UTC Nmap scan report for localhost (127.0.0.1) Host is up (0.00042s latency). Not shown: 998 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds. Source: 11 months ago
"/home/kali/.zshrc:read:261: -p: no coprocess Starting Nmap 7.93 ( https://nmap.org ) at 2023-06-13 13:29 EDT Read data files from: /usr/bin/../share/nmap WARNING: No targets were specified, so 0 hosts scanned. Nmap done: 0 IP addresses (0 hosts up) scanned in 0.02 seconds". Source: 11 months ago
┌──(kali㉿kali)-[~] └─$ sudo nmap -sS $(minikube ip) 7 ⨯ [sudo] password for kali: Starting Nmap 7.91 ( https://nmap.org ) at 2023-05-25 08:30 EDT Nmap scan report for 192.168.49.2 Host is up (0.0000050s latency). Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 8443/tcp open https-alt 10010/tcp open rxapi MAC... Source: 11 months ago
Hello all! Doing some routine security checks on my machines and while checking the open ports and services on my RPI 0 W2 I found the executable trinity-dist' running on port4711. I don't know what this is (Due to the relatively low processing power of the Pi) since I don't run anything else on it. I used the following command: Bash Nmap -p 1-65535 ::1 -6 To get this output: ``bash Starting Nmap 7.80 (... Source: 12 months ago
About the second command.... weird, here's what I got: ``` Starting Nmap 7.92 ( https://nmap.org ) at 2023-05-06 09:46 EDT Mass_dns: warning: Unable to determine any DNS servers. Reverse DNS is disabled. Try using --system-dns or specify valid servers with --dns-servers Nmap scan report for localhost (127.0.0.1) Host is up (0.000082s latency). Source: 12 months ago
Do you know an article comparing Nmap to other products?
Suggest a link to a post with product alternatives.
This is an informative page about Nmap. You can review and discuss the product here. The primary details have not been verified within the last quarter, and they might be outdated. If you think we are missing something, please use the means on this page to comment or suggest changes. All reviews and comments are highly encouranged and appreciated as they help everyone in the community to make an informed choice. Please always be kind and objective when evaluating a product and sharing your opinion.