No UNIGINE Benchmarks videos yet. You could help us improve this page by suggesting one.
Based on our record, UNIGINE Benchmarks should be more popular than Lm-Sensors. It has been mentiond 25 times since March 2021. We are tracking product recommendations and mentions on various public social media platforms and blogs. They can help you identify which product is more popular and what people think of it.
You could download an Unigine benchmark. If it runs like crap... You don't have acceleration (should be obvious). Where crap is anything less than 30fps (likely it will be far less). Source: about 1 year ago
If it's still happening, throw Memtest onto a spare USB, boot to that, and let it run through your RAM for errors. Then check your SSDs (your SSD manufacturer likely has a tool for this). Download and run a GPU benchmark/stress test, Unigine makes a few good ones, MSI Kombustor or Furmark, are good ones that I've used frequently for diagnostic work. Also run CPU stress tests like AIDA64, Prime95, Cinebench R23... Source: about 1 year ago
Is lag happening in all games? If so, test gpu with some of unigine benchmarks and compare results to similar systems. Source: about 1 year ago
You might also like the unigine benchmarks https://benchmark.unigine.com/ the heaven benchmark is about 14 years old now but it's a great demonstration of tesselation and gives you the ability to turn it on and off while it's running so you can see the effect. Tesselation is where the graphics card adds 3d geometry to flat surfaces based on textures, so cobblestones, rope, wood and a lot of metallic objects get a... Source: about 1 year ago
This one is the one I use for remote servers and it'll also tell you if it's running the same as others of the same graphics card. https://benchmark.unigine.com/. Source: about 1 year ago
Can you tell if they spinning at all? I've had many fans just go bad over the years. You might try using lm-sensors to see if you get any helpful info from the OS. Source: about 1 year ago
There is lm-sensors which has fancontrol. GUI-edition. Source: about 1 year ago
Https://github.com/lm-sensors/lm-sensors did you follow these instructions also? I feel like the im-sensors was an important step. Source: almost 2 years ago
Thanks, are you talking about https://github.com/lm-sensors/lm-sensors ? Source: almost 2 years ago
OpenRGB required a kernel patch, because it is trying to interface over I2C from userspace and one of the I2C controllers it needed support for didn't have a functional driver in the kernel yet. One of the biggest problems with the I2C bus, is that the kernel misses a lot of drivers for the various I2C controllers because the data sheets are usually not publicly available. This is also why lm-sensors often has... Source: over 2 years ago
Geekbench - Geekbench 4 measures your hardware's power and tells you whether your computer is ready to roar. How strong is your mobile or desktop system?
Open Hardware Monitor - Monitors temperature sensors, fan speeds, voltages, load and clock speeds, with optional graph.
Cinebench - CINEBENCH is a real-world test suite that evaluates your computer's performance capabilities.
Hardinfo - Hardinfo is a system information and benchmark tool for Linux.
3DMark - 3DMark includes everything you need to benchmark your hardware in one app.
SpeedFan - Hardware monitor for Windows that can access digital temperature sensors located on several 2-wire SMBus Serial Bus. Can access voltages and fan speeds and control fan speeds. Includes technical articles and docs.