UserGuiding
LinuxCNC (the Enhanced Machine Control)
Mach3
Vectric Aspire
PyCAM
Edgecam
Mastercam
Blender CAM
jscut
Usetiful
UserGuiding
Appcues
Userlane
Userpilot
Stonly
WalkMe
Product Fruits
Usetiful bridges the gap between users and digital systems. Guided tours and smart tips allow users to master any software system from day one.
Usetiful provides interactive product tours and smart tips into your application, improving user adoption and conversions instantly.
LinuxCNC (the Enhanced Machine Control) UsetifulNo features have been listed yet.
It was easy to get started - I have registered the free plan and created the first tour in approximately 15 minutes. Since then I have been improving on the experience.
Part of my application is a single-page app. It was quite techy to get this part running. Kudos for the customer support that walked me through!
I use Usetiful for various clients' projects that require product tours. Everyone was satisfied so far. Web editor allows me to quickly update the content and browser extension to preview the tours. Reports provide enough detail.
Based on our record, LinuxCNC (the Enhanced Machine Control) seems to be more popular. It has been mentiond 5 times since March 2021. We are tracking product recommendations and mentions on various public social media platforms and blogs. They can help you identify which product is more popular and what people think of it.
For a hobby machine, DIY might be the way to go. I did my sharp knee mill over several years. Ball screws from Rockford ball screws, were not cheap, but work well. Servo motors and gecko motor controllers from automationtechnologiesinc.com. Scales for feed back from dropros. Controller card from mesanet.com. All controlled with linuxcnc.org and a usb controller from vistacnc.com. Milled motor mounts for the... Source: over 1 year ago
I'm building a DIY-ish 3d printer, I know the Duet 3D boards can run spindles. https://www.machsupport.com/software/mach3/ Or Http://linuxcnc.org/ can run stepper driver boards with a spare desktop. Source: over 1 year ago
Good questions, I may be able to help with some of them but I know there are plenty of more experienced mill owners: 1. This is usually done manually or with indexing pins. If you look at the nomad flip jig you can see some techniques for physically re-aligning the part. Since you have skills in that area, a software solution could help, but I’m not aware of anything off the shelf in the hobby space. It could be... Source: almost 2 years ago
This system is so old, I would recommend looking into converting to LinuxCNC https://linuxcnc.org/. Source: about 2 years ago
If you are basically just a CNC operator they will take about the same amount of time to learn how to run them. LinuxCNC however may take a little more time configuring the system depending on features. You will definitely learn a bit more about how your machine operates configuring LinuxCNC since you have to compute a few settings based on your screw pitches and latency jitter of your PC. The calculators and... Source: over 2 years ago
Mach3 - Mach3 is very popular among the Hobby CNC community.
UserGuiding - User onboarding made easy, for less. Create product walkthroughs in a couple of clicks, without breaking the bank.
Vectric Aspire - The complete software solution for CNC Routing,
Appcues - Improve user onboarding, feature activation & more — no code required! Stop waiting on dev and start increasing customer engagement today. Try it for free.
PyCAM - PyCAM is a toolpath generator for 3-axis CNC machining.
Userlane - Digital adoption platform with interactive guidance for software applications allowing anyone to understand and master any software from the get-go.