Use https://sourceforge.net/projects/grub2win/ to manage dual (multiboot) from Windows , makes yput life easyer. If you have more than one disk instal Linux on a separate one if not you need to create a separate partition. When you install Linux if you have 2 drives make sure that Linux grub (bootloader) is installed on the drive wher Linux resides, not on the one where Windows and it's bootloader is, in case you... Source: about 1 year ago

Otherwise, what you'll have to do is image a USB drive with a partition management software or distro (e.g. GParted Live), boot from it, and then resize your partition from there. This does carry more risk of data loss than the dual SSD method, but it's more universal (you haven't mentioned if this is a laptop with more than one removable storage option or not, for instance), and it's unlikely to cause any harm.... Source: over 1 year ago

I have a suggestion, follow the previously advised installation process to install CrOS Flex on a separate drive, then reconnect and enable the Windows disk through the boot menu, once back there you can install a GRUB manager under Windows, like Grun2Win, it's easy to install and set up, once you are all done, the final result will be easier to switch from one OS to the next, instead of every time going through... Source: almost 2 years ago

When using Opencore for booting Windows 10, causes many issues. Even it causes issues when you boot MacOS after restarting from Windows 10. So Fix is Simple Use Grub2win as main bootloader and boot Windows or Opencore ( Chainload opencore efi file) from there. I am available for your queries and help. Source: almost 3 years ago

However, I have used this https://sourceforge.net/projects/grub2win/ I install it on the windows side and configure it. It will enable me to choose ubuntu> Ater booting in Ubuntu, I do grub install. If that's too complicated to install grub repair when you boot into Ubuntu and run it. Source: almost 3 years ago

Not sure where you're looking at that at but the direct homepage the updated Form3 which is Form3+ is 2,499 retails. Ebay itself is a marketplace of individual sellers. What they value it as and see it as is up to them entirely. If you look at formlabs.com they don't sell the regular 3 or 2 anymore. Refurbish Form 3 is there but I'm sure thats the last of whatever is left in warehouse. Source: about 1 year ago

Or if you need very detailed models, their dlp printer is great too - but the leaders in the resin area are more formlabs (https://formlabs.com/). Resin printing is great for extremely detailed items, but it's generally more expensive and requires more time investment for the parts (prep and post-processing required) - but still definitely hobbyist/casual friendly. Source: over 2 years ago

Rizél: So I did an internship at a company called Formlabs, and it's like a 3D printing startup. And then, after that, I already had another internship lined up at this company called Veson Nautical. And I ended up staying there and going full time. - Source: dev.to / over 2 years ago