No Rhino 3D videos yet. You could help us improve this page by suggesting one.
LinuxCNC (the Enhanced Machine Control) might be a bit more popular than Rhino 3D. We know about 5 links to it since March 2021 and only 4 links to Rhino 3D. We are tracking product recommendations and mentions on various public social media platforms and blogs. They can help you identify which product is more popular and what people think of it.
Try creating the "round" ring as a base and then try to join the square somehow using the commands that I said before. If you don't understand too much about these commands or never heard about them, start with the basic tutorials from rhino3d.com. Source: almost 2 years ago
Check out rhino3d.com and download the free trial then go through every tutorial. Don't get yourself financially invested into any CAD software (it can be very expensive) as many jewelers have their own seats which you'll in-turn tryout. Source: over 2 years ago
Rhino3d.com and download the free trial. Go through the tuts to learn the fundamentals of CAD. From there it's up to your knowledge of how a piece of jewelry is well made. When you're ready to buy, there are a few options in the market. May take you a half or maybe a full year (or more) to get to that point. GL. Source: over 2 years ago
Its not free but Rhinoceros 3D is a great CAD program that is very intuitive to learn. You can import pretty much any 2D or 3D files. The 2D aspects of use are very similar to Adobe Illustrator but with more control. Source: almost 3 years ago
For a hobby machine, DIY might be the way to go. I did my sharp knee mill over several years. Ball screws from Rockford ball screws, were not cheap, but work well. Servo motors and gecko motor controllers from automationtechnologiesinc.com. Scales for feed back from dropros. Controller card from mesanet.com. All controlled with linuxcnc.org and a usb controller from vistacnc.com. Milled motor mounts for the... Source: over 1 year ago
I'm building a DIY-ish 3d printer, I know the Duet 3D boards can run spindles. https://www.machsupport.com/software/mach3/ Or Http://linuxcnc.org/ can run stepper driver boards with a spare desktop. Source: over 1 year ago
Good questions, I may be able to help with some of them but I know there are plenty of more experienced mill owners: 1. This is usually done manually or with indexing pins. If you look at the nomad flip jig you can see some techniques for physically re-aligning the part. Since you have skills in that area, a software solution could help, but I’m not aware of anything off the shelf in the hobby space. It could be... Source: almost 2 years ago
This system is so old, I would recommend looking into converting to LinuxCNC https://linuxcnc.org/. Source: over 2 years ago
If you are basically just a CNC operator they will take about the same amount of time to learn how to run them. LinuxCNC however may take a little more time configuring the system depending on features. You will definitely learn a bit more about how your machine operates configuring LinuxCNC since you have to compute a few settings based on your screw pitches and latency jitter of your PC. The calculators and... Source: over 2 years ago
Blender - Blender is the open source, cross platform suite of tools for 3D creation.
Mach3 - Mach3 is very popular among the Hobby CNC community.
SketchUp - 3D for Everyone
Vectric Aspire - The complete software solution for CNC Routing,
FreeCAD - An open-source parametric 3D modeler
PyCAM - PyCAM is a toolpath generator for 3-axis CNC machining.