I purchased a used MSI r9 360 at a swap meet several days ago, and upon chucking it into my rig it worked well, however the fans did not spin by default. I was able to get it onto Radeon drivers (I think) but it doesn't show up on mangohud or psensor, and the only way to get the fans to actually spin is via this GitHub project which does work fine but booting up a program and having to run it in the background... Source: about 1 year ago

I used " radeon profile " when I first switched from windows to Linux, it's less fancy than adrenalyn, but it has some OC capabilities and such, if you wanna check it out. Source: about 1 year ago

And perhaps worth a mention that there is another app called Radeon Profile avilable at https://github.com/marazmista/radeon-profile similar to Corectrl, but it hasn't been maintained for the past 2 years. Source: about 1 year ago

First of all follow everything on this guide. If your GPU fans don't work install Radeon Profile (yay -S radeon-profile-git). If you have a multi-monitor setup and one of them doesn't work you can try checking in Radeon Profile if the monitors are detected, like this. If it is connected but not active and you can't get it to active, you can try changing the mkinitcpi.conf file and putting MODULES=(amdgpu radeon)... Source: over 1 year ago

My recommendation is that you try out radeon-profile and CAREFULLY read how you set it up and it's daemon. Source: over 1 year ago

Can you tell if they spinning at all? I've had many fans just go bad over the years. You might try using lm-sensors to see if you get any helpful info from the OS. Source: about 1 year ago

There is lm-sensors which has fancontrol. GUI-edition. Source: over 1 year ago

Https://github.com/lm-sensors/lm-sensors did you follow these instructions also? I feel like the im-sensors was an important step. Source: almost 2 years ago

Thanks, are you talking about https://github.com/lm-sensors/lm-sensors ? Source: almost 2 years ago

OpenRGB required a kernel patch, because it is trying to interface over I2C from userspace and one of the I2C controllers it needed support for didn't have a functional driver in the kernel yet. One of the biggest problems with the I2C bus, is that the kernel misses a lot of drivers for the various I2C controllers because the data sheets are usually not publicly available. This is also why lm-sensors often has... Source: over 2 years ago