Based on our record, OpenSCAD seems to be a lot more popular than LinuxCNC (the Enhanced Machine Control). While we know about 95 links to OpenSCAD, we've tracked only 5 mentions of LinuxCNC (the Enhanced Machine Control). We are tracking product recommendations and mentions on various public social media platforms and blogs. They can help you identify which product is more popular and what people think of it.
There's OpenSCAD, but I don't think it's exactly what you mean https://openscad.org/. - Source: Hacker News / 2 months ago
For something this simple you can use OpenSCAD (https://openscad.org). It's free and pretty easy to learn. Below are the two commands required to produce the solid object indicated by the picture. The application can export anything you create as an STL. Source: 5 months ago
Are you asking about something like https://openscad.org which allows you to code your model? An example of its use can be seen in the OpenFlexure project. Source: 5 months ago
I use OpenSCAD. https://openscad.org - it's what the Thingiverse Customizer is based on (and if you upload .scad files to Thingiverse, the Customizer works for your design too). Source: 10 months ago
One tool many people use for parametric modeling is OpenSCAD which is very utilitarian and has methods for constructing 3d and 2d geometry (and 3d from 2d such as extrusion). - Source: dev.to / 10 months ago
For a hobby machine, DIY might be the way to go. I did my sharp knee mill over several years. Ball screws from Rockford ball screws, were not cheap, but work well. Servo motors and gecko motor controllers from automationtechnologiesinc.com. Scales for feed back from dropros. Controller card from mesanet.com. All controlled with linuxcnc.org and a usb controller from vistacnc.com. Milled motor mounts for the... Source: over 1 year ago
I'm building a DIY-ish 3d printer, I know the Duet 3D boards can run spindles. https://www.machsupport.com/software/mach3/ Or Http://linuxcnc.org/ can run stepper driver boards with a spare desktop. Source: over 1 year ago
Good questions, I may be able to help with some of them but I know there are plenty of more experienced mill owners: 1. This is usually done manually or with indexing pins. If you look at the nomad flip jig you can see some techniques for physically re-aligning the part. Since you have skills in that area, a software solution could help, but I’m not aware of anything off the shelf in the hobby space. It could be... Source: almost 2 years ago
This system is so old, I would recommend looking into converting to LinuxCNC https://linuxcnc.org/. Source: over 2 years ago
If you are basically just a CNC operator they will take about the same amount of time to learn how to run them. LinuxCNC however may take a little more time configuring the system depending on features. You will definitely learn a bit more about how your machine operates configuring LinuxCNC since you have to compute a few settings based on your screw pitches and latency jitter of your PC. The calculators and... Source: over 2 years ago
FreeCAD - An open-source parametric 3D modeler
Mach3 - Mach3 is very popular among the Hobby CNC community.
LibreCAD - An open source 2D CAD application for Windows, Apple and Linux.
Vectric Aspire - The complete software solution for CNC Routing,
BRL-CAD - BRL-CAD: Open Source Solid Modeling
PyCAM - PyCAM is a toolpath generator for 3-axis CNC machining.