Based on our record, CrystalDiskInfo seems to be a lot more popular than Lm-Sensors. While we know about 418 links to CrystalDiskInfo, we've tracked only 7 mentions of Lm-Sensors. We are tracking product recommendations and mentions on various public social media platforms and blogs. They can help you identify which product is more popular and what people think of it.
Can you tell if they spinning at all? I've had many fans just go bad over the years. You might try using lm-sensors to see if you get any helpful info from the OS. Source: about 1 year ago
There is lm-sensors which has fancontrol. GUI-edition. Source: about 1 year ago
Https://github.com/lm-sensors/lm-sensors did you follow these instructions also? I feel like the im-sensors was an important step. Source: almost 2 years ago
Thanks, are you talking about https://github.com/lm-sensors/lm-sensors ? Source: almost 2 years ago
OpenRGB required a kernel patch, because it is trying to interface over I2C from userspace and one of the I2C controllers it needed support for didn't have a functional driver in the kernel yet. One of the biggest problems with the I2C bus, is that the kernel misses a lot of drivers for the various I2C controllers because the data sheets are usually not publicly available. This is also why lm-sensors often has... Source: over 2 years ago
>if you get the SMART data with smartmontools/smartctl, you can inspect Percentage Used. CrystalDiskInfo[1] can be used for this purpose over on Windows. Some vendor-provided utilities like Samsung Magician will also provide this data with appropriate drives. [1]: https://crystalmark.info/en/software/crystaldiskinfo/. - Source: Hacker News / 24 days ago
Verify that CrystalDiskInfo shows "Health: Good" for drive D. Source: 5 months ago
Plug it directly into sata and see if it's shown in disk manager with the correct capacity. If it is post a screenshot of the smart data from https://crystalmark.info/en/software/crystaldiskinfo/ and we can see what the best way to proceed would be . Source: 5 months ago
The disk is likely failing. DO NOT attempt any write operations like assigning a letter or changing file ownership. What you're saying suggests that the filesystem is corrupted, it's just unclear to what extent. It would be helpful if you provided a screenshot from CrystalDiskInfo. Most likely the best course of action is to boot https://www.hddsuperclone.com/hddlivecd and image the drive to a file on a different,... Source: 6 months ago
Minimum write size of a modern Flash chip can be ~100MB(!) according to a comment found in a random orange website[1]. So 5MB write every 10 minutes can be 600MB/hr, which is 4.8TB/8-hr-day, which is 24TB/40-hour-week, which is 3.43 DWPD real time for a 1TB drive, and 2500 TBW in 2 years real time[2]. Official quoted specification for SN850 is 600 TBW of write endurance, likely after derating for obvious warranty... - Source: Hacker News / 8 months ago
Open Hardware Monitor - Monitors temperature sensors, fan speeds, voltages, load and clock speeds, with optional graph.
Hard Disk Sentinel - Monitoring hard disk health and temperature. Test and repair HDD problems and predict failures.
Hardinfo - Hardinfo is a system information and benchmark tool for Linux.
HD Tune - HD Tune Pro is a hard disk / SSD utility with many functions. It can be used to measure the drive's performance, scan for errors, check the health status (S. M. A. R.
SpeedFan - Hardware monitor for Windows that can access digital temperature sensors located on several 2-wire SMBus Serial Bus. Can access voltages and fan speeds and control fan speeds. Includes technical articles and docs.
CrystalMark - CrystalMark is a full included benchmark application that can be utilized for surveying the execution and capacities of a PC.