Digikey World’s Largest Selection VS Circuit Simulator

Digikey World’s Largest Selection Reviews

Circuit Simulator Reviews

Digikey World’s Largest Selection mentions (51)

• part no's for the power and heat connectors for the hot end on the pcb

  Does anyone know the digikey.com or mouser.com part numbers for these 2 connectors. Both are 2-pin but a slightly different pitch. Source: 5 months ago

• Good mask sampler packs out there?

  1) digikey.com - They sell as few as a single mask of many types including 3M VFlex N95, as well as more specialized disposable respirators like carbon-lined 3M 8247 RN95, or N100s, etc. If you want to see their whole selection, you can choose Tools -> Personal Protective Equipment (PPE) then under "Type" choose Disposable Particulate Respirator and click Apply All. Source: 7 months ago

• Leap + This Button Ring = PointCtrl - This is my version

  A couple pics of older versions prior to cleaning it up and figuring out the wiring. It's important that the buttons are placed the same way up/down and correctly to ensure you're soldering/using the correct polarity on each of the 4 points. I have an updated diagram I made in case anyone is daring, it's only about 30$. digikey.com has everything you need at the best prices. Amazon is overpriced to use the... Source: 10 months ago

• Need information for broken regulator

  Digikey.com and mouser.com are your friends, if it doesn't show there then things get more difficult. Source: 11 months ago

• Seeking advice to repair an overvolted controller

  Mouser.com and digikey.com are the popular ones but they tend to be a bit overwhelming. I did some digging and found this post and skipping ahead to this image they indicate the location of the voltage regulator, and even list it as being a TI tpsSomething or other, very interesting chip, looks like it can actually handle single li-ion/po cell, but not 2 in series. Bad news is thats not something I would want to... Source: 12 months ago

Circuit Simulator mentions (29)

• I am trying to recreate this circuit in TinkerCAD, which is not giving me the correct current values. What am I doing wrong here?

  Have you tried modeling it in falstad's onine circuit simulator? Source: 11 months ago

• How do engineers be confident when printing a PCB?

  Simulation is not viable for all but the most trivial circuits, and even then it won't catch things like a wrong footprint. I do occasionally use the Falstad simulator for simple analog circuits, but that just isn't possible with complicated digital ICs. Source: 12 months ago

• How can I derive the equation on the right? Please help!

  I don't know, but you could try simulating the circuit in Falstad circuit simulator to look at what is going on. Source: 12 months ago

• ELI5: How to make an electrical circuit that can be switched on and of at specific intervals?

  You can use Falstad to make sure you have a basic understanding of how relays work. Source: 12 months ago

• Need recommendations for PCB simulation and printing software

  This is quit comprehensive, but missing the awesome and intuitive online simulator: falstad. Source: about 1 year ago