AstroPrint VS Slic3r

Use astroprint.com, I get good prints from the default profile using this. Tweak to your liking. Source: over 1 year ago

Thats what my dad did and it worked for me, my printer had another 3 days of work before its first print, also to get your prints to stick to the plate (if you have this problem) put some painters tape over the deck and put spray adhesive over the tape, wait for it to dry, and print. For software to use on windows (or mac) download cura (its free) and for chrome (or if you dont want to download/ have a slow... Source: over 1 year ago

I'd certainly reccomend it since you need to convert the 3d model into gcode that the printer can process, but there are a handful of web based slicers like these: realvisiononline.com astroprint.com grid.space/kiri/. Source: over 2 years ago

That should get OctoPrint up and running! Now as for slicing, I use Astroprint! It’s pretty easy to add the Astroprint plug-in to OctoPrint, and works like a charm! With my Ender 3 it uses Cura 3.6.0 as the default slicer, and I’ve not had any issues with it so far. (Outside the normal growing pains of learning to 3D print, anyway.) Astroprint is free for a normal account, so you can be up and running quickly and... Source: about 3 years ago

I split my Boba Fett helmet STL in Slic3r. It was incredibly easy to split the file into 8 parts. The top and bottom halves split at the visor line, then split those pieces into halves and then halves again so they will fit on the bed. Source: almost 2 years ago

Try using a diffent slicer. Either cura or slic3r. Source: over 2 years ago

I use Slic3r where the preview is quite easy to get, but the configuration might be a bit scary to get done (although the defaults are reasonable) as you want to try with adding or removing support material. Source: almost 3 years ago