Categories |
|
---|---|
Website | almico.com |
Categories |
|
---|---|
Website | crystalmark.info |
Based on our record, CrystalDiskInfo seems to be a lot more popular than SpeedFan. While we know about 418 links to CrystalDiskInfo, we've tracked only 5 mentions of SpeedFan. We are tracking product recommendations and mentions on various public social media platforms and blogs. They can help you identify which product is more popular and what people think of it.
I use an app to check system temps: OpenHardwareMonitor. Some people like SpeedFan, does most of the same stuff. Source: over 1 year ago
That's not super common (but it does happen ofc). It might be worth running a tool to scan the drive and take a peek at the SMART data. I typically use Speedfan https://almico.com/speedfan.php. Source: over 1 year ago
You'll get better gpu support from Afterburner, but if you have a weird chipset or an incompatible fan controller, good old SpeedFan still has a few tricks. Source: over 1 year ago
Check disk health with speedfan from http://almico.com/speedfan.php. Source: over 2 years ago
Speedfan Freeware gives you some info about your temps, but its mostly used to set up your custom fan control, such as increasing rpm of your front intake fans when temp of GPU and/or CPU reaches a certain point and much more, how much you can do with it depends on the fan controller chip that is used on your mainboard, so you mileage may vary. Source: over 2 years ago
>if you get the SMART data with smartmontools/smartctl, you can inspect Percentage Used. CrystalDiskInfo[1] can be used for this purpose over on Windows. Some vendor-provided utilities like Samsung Magician will also provide this data with appropriate drives. [1]: https://crystalmark.info/en/software/crystaldiskinfo/. - Source: Hacker News / 15 days ago
Verify that CrystalDiskInfo shows "Health: Good" for drive D. Source: 4 months ago
Plug it directly into sata and see if it's shown in disk manager with the correct capacity. If it is post a screenshot of the smart data from https://crystalmark.info/en/software/crystaldiskinfo/ and we can see what the best way to proceed would be . Source: 4 months ago
The disk is likely failing. DO NOT attempt any write operations like assigning a letter or changing file ownership. What you're saying suggests that the filesystem is corrupted, it's just unclear to what extent. It would be helpful if you provided a screenshot from CrystalDiskInfo. Most likely the best course of action is to boot https://www.hddsuperclone.com/hddlivecd and image the drive to a file on a different,... Source: 6 months ago
Minimum write size of a modern Flash chip can be ~100MB(!) according to a comment found in a random orange website[1]. So 5MB write every 10 minutes can be 600MB/hr, which is 4.8TB/8-hr-day, which is 24TB/40-hour-week, which is 3.43 DWPD real time for a 1TB drive, and 2500 TBW in 2 years real time[2]. Official quoted specification for SN850 is 600 TBW of write endurance, likely after derating for obvious warranty... - Source: Hacker News / 8 months ago
Open Hardware Monitor - Monitors temperature sensors, fan speeds, voltages, load and clock speeds, with optional graph.
Hard Disk Sentinel - Monitoring hard disk health and temperature. Test and repair HDD problems and predict failures.
iStat Menus - "An advanced Mac system monitor for your menubar."
HD Tune - HD Tune Pro is a hard disk / SSD utility with many functions. It can be used to measure the drive's performance, scan for errors, check the health status (S. M. A. R.
Argus Monitor - Argus Monitor is for monitoring and analyzing the temperature and the health status of the hardware parts of the system.
CrystalMark - CrystalMark is a full included benchmark application that can be utilized for surveying the execution and capacities of a PC.