CoreCtrl VS Radeon Profile

> I only want some decent fan control instead of relying on random scripts off github. AMD has to release some sort of GUI panel for sure. Have you tried CoreCtrl [0]? > My 5800x3D and 6800XT deliver an outstanding Linux gaming experience. I have a 7900XTX and performance under Linux has been at least on par with Windows, sometimes better (though not by much). > May I ask what driver features are you missing? I'm... - Source: Hacker News / 4 months ago

> The AMD experience on Linux is vastly better than the Nvidia one. I just wish we had an equivalent of AMD Software on Linux, so I could mess around with the settings more. For example, I like to limit the GPU to 50-75% of it's total power for ambient heat/cooling reasons, or UPS/PSU/electricity bill reasons when specific games make it hard to cap framerates. With AMD Software on Windows, it's no big deal. On... - Source: Hacker News / 8 months ago

If you set it to POWER_SAVING instead of 3D_FULL_SCREEN, it uses the highest boost clock a lot less. Or if you use something like corectrl's application profiles (maybe the Windows vendor driver control panel has them?), you can selectively disable boost clock states in specific games. Source: 10 months ago

I'm bias toward Asus motherboards. I have an "Asus TUF GAMING B550-PLUS WIFI II" and a "Asus ROG Crosshair VIII Hero (WI-FI) ATX". Both boards have a fan control feature in the BIOS/EFI. On the Windows side both boards come with Ai Suite 3 software. On the Linux side you might want to take a look at Corectrl ==> https://gitlab.com/corectrl/corectrl. Source: 10 months ago

I think CoreCtrl might offer some of what you're looking for. Source: 10 months ago

I purchased a used MSI r9 360 at a swap meet several days ago, and upon chucking it into my rig it worked well, however the fans did not spin by default. I was able to get it onto Radeon drivers (I think) but it doesn't show up on mangohud or psensor, and the only way to get the fans to actually spin is via this GitHub project which does work fine but booting up a program and having to run it in the background... Source: 11 months ago

I used " radeon profile " when I first switched from windows to Linux, it's less fancy than adrenalyn, but it has some OC capabilities and such, if you wanna check it out. Source: 11 months ago

And perhaps worth a mention that there is another app called Radeon Profile avilable at https://github.com/marazmista/radeon-profile similar to Corectrl, but it hasn't been maintained for the past 2 years. Source: about 1 year ago

First of all follow everything on this guide. If your GPU fans don't work install Radeon Profile (yay -S radeon-profile-git). If you have a multi-monitor setup and one of them doesn't work you can try checking in Radeon Profile if the monitors are detected, like this. If it is connected but not active and you can't get it to active, you can try changing the mkinitcpi.conf file and putting MODULES=(amdgpu radeon)... Source: about 1 year ago

My recommendation is that you try out radeon-profile and CAREFULLY read how you set it up and it's daemon. Source: over 1 year ago